xl650mithzfr_19_0.jpg
  • xl650mithzfr_19_0.jpg

DILLON XL 650 MIT HÜLSENZUFÜHRUNG 9MM/38S/9x21

100948
0 Artikel

1.099,00 €
inkl. MwSt.

DILLON XL 650 MIT HÜLSENZUFÜHRUNG 9MM/38S/9x21

Menge
Nicht auf Lager

  • Sichere Zahlunsmethoden und geprüfte Qualität Sichere Zahlunsmethoden und geprüfte Qualität
  • Schnelle Lieferung Schnelle Lieferung
  • 14 Tage Rücktrittsrecht vom Kaufvertrag 14 Tage Rücktrittsrecht vom Kaufvertrag

DILLON XL 650 MIT HÜLSENZUFÜHRUNG 9MM/38S/9x21

 

  •  5 station progressive loader
  • Station 1) resize/deprime
  • Station 2) powder drop/flare
  • Station 3) powder check
  • Station 4) seat
  • Station 5) crimp
  • Mechanically indexed shellplate
  • Mechanically inserted cases, manually fed bullets. Casefeed tube to automatically insert cases. Capable of loading 500 to 800 rounds per hour Lifetime "No-B.S." Warranty

The basic 650 includes the following:
 

  • One powder measure with standard large and small powder bars (small bar installed), Small bar throws from 2.1 to 15 grains of powder, Large bar throws from 15 to 55(extruded type)-60(ball/spherical type) grains of powder.
  • One prime system with large and small priming parts(appropriate size installed).
  • One large and one small primer pick-up tube.
  • One loaded cartridge bin
  • One toolhead
  • One powder die
  • One caliber conversion kit - installed
  • One set of standard Allen wrenches
  • No dies are included with the machine.

Machine Height from bench is 32" without the optional electric case feeder, 38 1/2" with the electric casefeeder installed
 

  • Machine pictured shows available options. These are not included with the base machine.
    Instructional DVD
    Electric case feeder automatically feeds cases right side up into the case feed tube, stops and start automatically to keep the tube filled.

    Powder check die a sensor that goes down into each case to monitor the level of powder in it. In the event of a significant error in powder charge, either high or low, it sounds an audible alarm.

    Roller handle available in plastic or aluminum grip, reduces fatigue, more comfortable to use for extended reloading sessions.

    Strong mount - if your bench is either too low for comfortable use, or you need to access drawers underneath , the strong mount elevates the entire machine above your bench top. Raises height of the 650 to 38 1/2" without the optional electric casefeeder, to 44 1/2" with the electric casefeeder installed

    Bullet Tray-Only usable with the strong mount, the bullet tray elevates the bullets to the level of the shellplate for easier reach.

    Low powder alarm - warns you both audibly and visibly when powder level in the measure gets low.

    Extra small bar throws down to about .5 grain

    Magnum bar throws up to 73 grains of extruded and 82 grains of ball/spherical powder.

    Belted Magnum Powder System- Throws over 110 grains of powder, Comes with the oversize powder die needed for calibers too large in diameter to fit in the standard powder die.

Technische Daten

KALIBER
9mm PARA
Neuer Artikel